DVC8-4 SINE

Digital SINE Controller Specifications

DISPLAY MONITOR:

  • SWEEP: Frequency, direction, rate (Log or Lin), lower limit, upper limit, sweep count.
  • COMPRESSOR: Rate, speed, dB of compression.
  • ACCELERATION: 0 to 200 g-pk.
  • VELOCITY: 0 to 200 in /sec
  • DISPLACEMENT: 0 to 10 in. pk-pk.
  • TIME: Time, date, test run time.
  • UNITS: English or Metric.

Download: DVC -4/8 Digital Swept-Sine Controller Operating Manual

TEST ARTICLE PROTECTION:

  • ABORT LIMIT: Settable 1 to 99 dB abort, Settable system limits for D,V, and A. Low-level gain and open-loop checks.
  • OVERALL LIMITS: Overall D,V,A limits settable by user.
  • CONTROL SIGNAL LOSS: Open loop detector.
  • MANUAL ABORT: From keyboard or mouse.

TEST DOCUMENTATION:

Any of the following plots can be stored on disk or printed out in color or black and white on any Windows compatible printer.

  • CONTROL CHANNEL: Control profile.
  • MONITOR CHANNEL: Response profile.
  • CONTROL/MONITOR: Control profile and response profile.

SYSTEM REQUIREMENTS:

  • COMPUTER: 486DX33 or better with vga display, 8 mb ram, hard disk and Windows 3.1 minimum, Pentium with 16mb ram and Windows 95 recommended.
  • POWER REQUIREMENTS: Powered by computer buss, <10W total.
  • SIZE: Standard AT 3/4 size PC card (9.5° x 4.625°).
  • EXTERNAL CONNECTIONS: Via DB-25 connector to junction box.

FREQUENCY:

  • RANGE: 2 to 6250 Hz, digitally synthesized.
  • STABILITY: +/- 100ppm/°C, crystal-controlled.
  • DISTORTION: <0.50% thd 0.25% typical.
  • LIMITS: Sweeps between programmed upper and lower limits.

SWEEP MODES:

  • CONTINUOUS: Up to 9999 cycles between set limits.
  • HALF-CYCLE: Up or down for response plotting.
  • MANUAL: With keyboard arrows.
  • SWEEP: Logarithmic, linear, or Mil 167.

SWEEP RATES: 

  • 0.1 to 9.99 oct/min for log or 0.1 to 99.9 Hz/sec for linear.

SIGNAL INPUTS:

  • INPUT CHANNELS: Two channels: one control & one monitor
  • INPUT SENSITIVITY: Settable from 8 to 1000 mvg, 20 vp-pmax input.
  • CURRENT SOURCES: 4 ma each input, 18 vdc compliance on each channel.

SIGNAL OUTPUT: 

  • SERVO OUT: 0-5 vrms for amplifier drive, short protected.

TEST PROFILES:

  • Up to 32 frequency breakpoints or levels of D,V. or A may be specified for each test; profiles may be stored on disks.

SERVO COMPRESSOR:

  • DYNAMIC RANGE: >70 dB.
  • CONTROL ACCURACY: <+/- 0.5 dB nominally.
  • COMPRESSION RATE: Slow- 0.1 dB/sec/Hz, Med – 0 3 dB/sec/Hz, Fast- 1.0 dB/sec/HZ.
  • COMPRESSION SPEED LIMIT: Programmable from 200 to 1000 dB/sec.
  • CONTROL LIMITS: From 0.2 to 200 g with 10 mv/g input.

OFFERINGS

PIND
Mechanical Shock
Vibration
Services
Custom Solutions